Honda introduced the CL644 at the 1995 Tokyo Motor Show as an interpretation of the traditional scrambler, using a considerably larger engine than the small-displacement CL motorcycles of previous decades. Its design combined the familiar proportions of a classic road motorcycle with a 644cc air-cooled single-cylinder engine derived from Honda's XR650 family.

The engine used Honda's Radial Four Valve Combustion Chamber (RFVC) architecture, with four valves positioned radially around a centrally located spark plug. This arrangement was developed to improve combustion efficiency and breathing in large single-cylinder engines. An overhead camshaft operated the valves, while air cooling kept the powerplant relatively simple and mechanically exposed.

The CL644 was not designed as a high-revving sports motorcycle. Instead, Honda concentrated on the character and usable torque of a large single-cylinder engine, combined with an upright riding position and traditional styling. Its substantial engine dominated the center of the motorcycle, with much of the mechanical hardware left visible.

A pair of high-mounted chrome exhaust pipes ran along the side of the motorcycle, terminating in two raised mufflers. The arrangement recalled Honda's original CL scramblers while giving the larger engine a distinctive appearance. Wire-spoked wheels, a conventional telescopic front fork, twin rear shock absorbers, and a long, relatively flat seat reinforced the classic layout.

The CL644 measured 2,240mm long, 850mm wide, and 1,250mm high. Its generous dimensions made it significantly larger than the smaller scramblers that inspired it.

Honda developed the CL644 alongside the Super Mono 644, a more aggressive sports motorcycle using the same basic engine architecture. By displaying two very different machines around the 644cc single, Honda demonstrated how one powerplant could support both a traditional scrambler and a dedicated sporting roadster.

The CL644 never entered production in its original form. However, Honda revisited the basic idea with the CL400, introduced in Japan in 1998. That motorcycle used a smaller 397cc air-cooled single and retained the classic styling approach, including high-mounted exhausts and upright ergonomics.

The CL644 was an early example of the large-displacement retro scrambler concept that would become increasingly popular among motorcycle manufacturers during the following decades.