Czinger introduced the 21C Spyder at Monterey Car Week on August 14, 2026, adding an open-top version to its American-built hypercar lineup. Based on the 21C HDF, the Spyder retains the coupe's 1,250-horsepower hybrid powertrain, tandem seating arrangement, and extensive use of 3D-printed components. Production is limited to just 30 examples, with prices starting at $2.75 million.

The 21C Spyder is the third version of the 21C, joining the high-downforce HDF and the more streamlined VMax. Its carbon-fiber body retains the original's low nose, prominent front splitter, sculpted fenders, and enormous rear wing. The biggest difference is the removable roof, which weighs just 22 pounds (10 kg) and attaches using two latches inside the cabin. A separate fabric roof can also be carried in the car for unexpected weather.

Unlike a conventional two-seat sports car, the 21C places its occupants directly behind one another, with the driver seated centrally and the passenger behind. This unusual arrangement allows for a narrower passenger compartment and improves aerodynamic efficiency. The original carbon-fiber monocoque was designed to accommodate an open-top version from the beginning, requiring only additional reinforcement around the windshield pillars.

Despite losing its fixed roof, the Spyder weighs just 22 pounds more than the HDF, with a dry weight of 3,571 pounds (1,620 kg). Czinger also claims that removing the roof has little effect on aerodynamic performance. At 150 mph, the car produces 3,267 pounds (1,482 kg) of downforce with the roof removed, compared with 3,307 pounds (1,500 kg) with it installed.

Power comes from Czinger's own 2.88-liter twin-turbocharged, flat-plane-crank V8, producing 750 horsepower and revving to 11,000 rpm. The engine weighs just 231 pounds (105 kg), thanks partly to its compact design and additively manufactured components. Two electric motors drive the front wheels, while a third motor-generator is connected to the V8's crankshaft. Together, the electrical system contributes another 500 horsepower, bringing combined output to 1,250 horsepower and 691 lb-ft of torque.

The rear wheels receive power through a seven-speed automated manual transmission developed with Xtrac, while the front electric motors provide all-wheel-drive traction. Czinger claims a 0–60 mph time of 1.9 seconds, an 8.7-second quarter-mile, and a top speed of 205 mph (330 km/h).

One of the Spyder's most significant engineering developments is its new BrakeNode system. Rather than using a separate brake caliper and suspension upright, Czinger combines both components and the internal hydraulic passages into a single 3D-printed aluminum structure. Manufactured from the company's proprietary Z301 alloy, the assembly reduces unsprung weight, increases stiffness, and improves cooling. According to Czinger, the redesigned system can reduce stopping distances by up to 15 percent.

The BrakeNode assemblies operate with six-piston front and four-piston rear calipers, gripping carbon-ceramic discs measuring 410 mm (16.1 inches) and 390 mm (15.3 inches), respectively. The suspension uses double wishbones with pushrod-operated inboard springs and electronically adjustable dampers. Approximately 23 percent of the vehicle incorporates additively manufactured structures, including suspension components, crash structures, and the transmission housing.

The interior has also been redesigned around a new system called NeuralNode. This replaces the conventional dashboard assembly with an integrated structure housing the instruments, vehicle controls, and climate system. Air flows through the structure itself before exiting through vents positioned around the driver. The cabin also includes a redesigned steering wheel, physical controls, wireless Apple CarPlay, and a 650-watt Morel audio system with eight speakers.

The 21C Spyder will be hand-assembled at Czinger's Area 21 facility in Los Angeles. Each of the 30 examples can be extensively personalized, including the exterior finish, upholstery, carbon-fiber surfaces, and even the colors of individual 3D-printed components.

With its tandem cockpit, high-revving hybrid V8, and unconventional manufacturing methods, the Spyder retains much of what makes the original 21C unusual. Removing the roof introduces an entirely different driving experience without requiring significant changes to the car's underlying structure or aerodynamics.